New arrivals

Archive

hh1



BL Silver Coat RT / Trial Kit


BL Silver Coat RT was developed by blending different techniques from a conventional silver mirror coating while the substrate surface derives from a ”mirror-finishing via silver” silver chrome tone-painting system of our completely new process, cutting down application time without sacrificing quality. Originating from state-of-the-art nanotechnology which guided the development, we succeeded in coagulating the silver nanoparticles at low temperatures. Compared to silver film from a conventional silver mirror reaction, we created a high-brightness and stable silver film. In addition, BL Silver Coat RT is able to be applied with normal painting equipment – a compressor and spray gun. Thus you don’t need specialised and dedicated equipment normally required for conventional silver mirror coating, like twin-nozzled spray guns, etc. The application process has been greatly simplified. We have developed a very proficient, excellent silver chrome-tone paint processing technique which both saves time and money while increasing quality for excellent cost/performance.
◯ Patented
◯ Safety Data Sheet (SDS sheets) can be attached.



Unique Characteristics


In BL Silver Coat RT, the “silver” is composed of state-of-the-art nanotechnology using nano-particles ( 1 nanometer = 0.000000001 meters / one-billionth of a meter ), which allow you to form a silver film of extremely fine silver particles and special paint. As a result, the painted surface becomes mirror-finished in a state closely resembling an actual “mirror”. This is the most advanced special paint system without requiring conventional plating bath resulting in the the quality and look of plating but the ease of painting.

Painting Equipment

◯ Normal painting equipment: you can spray paint using a normal compressor and spray gun.
◯ You don’t need private, specialized facilities or equipment such as a twin nozzle spray gun.
◯ It can also be applied using industrial inkjet printers.

Recommended Spray Gun

Application of Silver :
We recommend an air brush or using a low-pressure gun.
▷ When painting a small area while using an air brush: use caliber 0.2~0.5mm
▷ When painting a larger area with a low-pressure gun: use caliber 0.5~1.0mm


For applying the primer and clear topcoat :
We recommend the use of a spray gun.
▷ Spray gun: use caliber 0.8~1.3mm

Three-step Painting Process

Painting process is just three steps:
1. Base Primer
2. Silver
3. Clear Topcoat

Applicable Target Substrates

◯ The following are substrate/bases – Resin / Plastic material / Most metals.
◯ Drying time is 30 minutes at 80 ℃ when using a dryer. Room temperature drying is also possible.

Low Cost

◯ Compared to conventional plating and silver mirror plating,the work process has been greatly simplified and streamlined.
◯ Manufacturer-recommended silver is only 0.2μm, resulting in excellent cost-performance.

Possible Application Area Size

When using a spray gun :
About 15g of silver ( 0% dilution rate ) at 100% is needed to cover about 1 square meter.


When using a spray gun :
About 40g of silver ( 200% dilution rate ) at 30% is needed to cover about 1 square meter.

Variety of Colors

◯ Clear Topcoat – we use urethane-based solvent, which can be tone-adjusted.
◯ A variety of color variations, silver foil tone finishes, and metallic tones are possible.
◯ Increase value by adding luxury textures to the surface.

torage and Drying Conditions / Expiration date

◯ Storage location : Do not store in a direct sunlight or in a high temperature.
◯ Expiration date : Three months at the longest. After opening it, one should keep it in a cool, dark place and use it up as soon as possible.


gz 1



BL Silver Coat RT Application Technique


BL Silver Coat RT is applied in the following three steps.

1. Undercoat / Primer Application

◯ 30 minutes of forced drying at 80 ℃.
◯ In case of drying at room temperature, allow it to dry for 7 days or more following application.

2. Intermediate / Silver Application

◯ 10 minutes of forced drying at 80 ℃.
◯ In the case of drying at room temperature, allow it to dry for 48 hours or more following application.

3. Overcoat / Clear Topcoat Application :

◯ 30 minutes of forced drying at 80 ℃.
◯ In case of drying at room temperature, allow it to dry for 7 days or more following application.


[ Important Point # 1: Complete Removal of the Thinner ]

After each step, it is important to make sure that all traces of the thinner have evaporated and is no longer in the surface. Regardless of using forced drying or drying at room temperature, all of the volatile components of thinner should be removed. If there is still component traces of the thinner, it may impact the development of the silver finish (the color may become affected/turn bluish).


[ Important Point #2: Temperature Settings while using of Forced Drying ]

Forced drying requires for the temperature to be constant at 80° C. Rather than just the temperature setting of the drying furnace, the temperature of the entire piece being worked on. In addition, after finishing the piece from forced heating, please allow it to return to room temperature before proceeding to the next coating step.


[ Important Point #3: Foundation Building ]

Since BL Silver Coat works with completely with a very thin film, the base preparation for the application surface is very important. Priming of the application surface and preparing it to be totally smooth for a perfect mirror surface state is recommended.


momo-1



Procedure Instructions

1. Primer : Application of Primer

[ Top Primer main agent ] : Primer
[ Top Primer curing agent ] : Primer
[ Top Primer, thinner ] : Primer Thinner
[ Mixing Ratio ] : The main agent / curing agent = 6/1 ( mass ratio )
[ Dilution Ratio ] : base resin / hardener / thinner = 6/1 / 4-6 ( mass ratio )
[ Paint Viscosity ] : 8-10 S / IHS
[ Time required for levelling ] : 5-10 minutes / heat treatment, be sure of the course after application at this time.
[ Recommended thickness ] : 10~20μm
[ Drying Times ]
▷ 30 minutes at forced drying = 80 ℃.
▷ If drying at room temperature ( 25 ℃ as standard ) please let stand for at least 7 days after application.
▷ However, outdoor drying time depends on the normal temperature and humidity of the environment and varies by region and/or weather conditions.

2. Intermediate : Application of Silver

[ Paint / silver ] : Silver
[ Thinner / silver ] : Silver Thinner
[ Dilution Ratio ] : silver / thinner = 1 / 1-3 ( mass ratio )
[ Paint viscosity ] : 6~8 S / IHS
[ Time required for levelling ] : 5-10 minutes / heat treatment, be sure of the course after application at this time.
[ Recommended thickness ] : 0.2μm
[ Drying Times ]
▷ 30 minutes at forced drying = 80 ℃.
▷ If drying at room temperature ( 25 ℃ as standard ) please let stand for at least 7 days after application.
▷ However, outdoor drying time depends on the normal temperature and humidity of the environment and varies by region and/or weather conditions.

3. Overcoat : Construction of the Clear Topcoat

[ Clear Topcoat main agent ] : Top Clearcaot
▷ The Clear Topcoat is a urethane-based paint, so it’s possible to add toning pigment.
[ Clear Topcoat curing agent ] : Top Clear
[ Clear Topcoat, thinner ] : Top Thinner
[ Mixing Ratio ] : the main agent / curing agent = 8/1 ( mass ratio )
[ Dilution Ratio ] : the main agent / hardener / thinner = 8/1 / 4-6 (mass ratio )
[ Paint viscosity ] : 8-10 S / IHS:
[ Time required for levelling ] : 5-10 minutes / heat treatment, always passed this time post-construction of that.
[ Recommended thickness ] : 10~20μm
[ Drying Times ]
▷ 30 minutes at forced drying = 80 ℃.
▷ If drying at room temperature ( 25 ℃ as standard ) please let stand for at least 7 days after application.
▷ However, outdoor drying time depends on the normal temperature and humidity of the environment and varies by region and/or weather conditions.


momo-2



BL Silver Coat RT / Trial Kit contents


Primer / Three total
■ Main Agent / Primer ( 480g )
■ Curing Agent / Primer ( 80g )
■ Dedicated Thinner / Primer Thinner ( 500cc )


Silver / Two total
■ Silver / Silver (200cc)
■ Dedicated Thinner / Silver Thinner ( 500cc )


Clear Topcoat/ Three total
■ Main Agent / Top Clear ( 400g )
■ Curing Agent / Top Clear ( 50g )
■ Dedicated Thinner / Top Thinner ( 500cc )



The Price

BL Silver Coat RT / Trial Kit : 62,000JPY

◯ Shipping charges : Not included.
◯ + Special packing fee for the handling of hazardous materials : 3,000 JPY
◯ + Shipping charge


Order : BL Silver Coat RT / Trial Kit


About Shipping Charges


Paint in general is treated as hazardous goods, so for shipping charges, we must make individual estimates by airline according to country and region. First, please send us the order form below. We will calculate the shipping charges to your nearest airport / Term : CIF. We will then send you a bill including those shipping charges via paypal. After checking that amount, please decide whether or not to purchase BL Silver Coat RT. paypal is our only payment method. You can cancel the order at any time. In addition to the shipping charges, you will be charged an extra 3,000 JPY special packing fee for the handling of hazardous materials. Furthermore, please note that it will be about 10 days before items are shipped.


[ Estimated shipping charges ]

Asia : 40,000〜50,000JPY, India / Middle east : 75,000〜85,000JPY, North america : 45,000〜55,000JPY, Central America : 55,000〜65,000JPY, South America : 75,000〜85,000JPY, Australia / Oceania : 45,000〜55,000JPY, Europe / Russia : 60,000〜75,000JPY, Africa : 55,000〜80,000JPY



How to order


[ BADLAND ]
ZIP CODE : 212-0055
4-18-1 Minamikase Saiwaiku Kawasaki Kanagawa JAPAN
TEL 044-587-3139 / FAX 044-580-3431 / e-mail : info@badland.net


Please contact us with the following via e-mail below : info@badland.net

▷ Your name / e-mail / Zip code / Address / Country / Telephone number / The number of orders


◯ To order please contact our company directly.
◯ Paint in general is treated as hazardous goods, so for shipping charges, we must make individual estimates by airline according to country and region.
◯ Please note that it will be about 10〜14 days before items are shipped.
◯ If you have any questions, please feel free to contact us.

BL Silver Coat RT

BL Silver Coat, which was developed by a different technology than the BL silver coat RT conventional silver mirror painting, makes it possible to finish the surface in a “mirror-finished by silver” in a short time. Silver chrome tone paint in an entirely new process

 

 

 

Recommend News